Antenna factor
Part of a series on |
Antennas |
---|
![]() |
Common types
|
Components
|
Systems
|
Radiation sources / regions |
Techniques
|
|
In electromagnetics, the antenna factor (AF, units: m−1, reciprocal meter) is defined as the ratio of the electric field E (units: V/m or μV/m) to the voltage V (units: V or μV) induced across the terminals of an antenna:
If all quantities are expressed logarithmically in decibels instead of SI units, the above equation becomes
The voltage measured at the output terminals of an antenna is not the actual field intensity due to actual antenna gain, aperture characteristics, and loading effects.[1][clarification needed]
For a magnetic field, with units of A/m, the corresponding antenna factor is in units of A/(V⋅m). For the relationship between the electric and magnetic fields, see the impedance of free space.
For a 50 Ω load, knowing that PD Ae = Pr = V2/R and E2= PD ~ 377PD (E and V noted here are the RMS values averaged over time), the antenna factor is developed as:
Where
- Ae = (λ2G)/4π : the antenna effective aperture
- PD is the power density in watts per unit area
- Pr is the power delivered into the load resistance presented by the receiver (normally 50 ohms)
- G: the antenna gain
- is the magnetic constant
- is the electric constant
For antennas which are not defined by a physical area, such as monopoles and dipoles consisting of thin rod conductors, the effective length (units: meter) is used to measure the ratio between voltage and electric field.
See also
Notes
- ^ Electronic Warfare and Radar Systems - Engineering Handbook (4th ed.). US Naval Air Warfare Center Weapons Division. 2013. p. 192.
References
- Interpreting Antenna Performance Parameters for EMC Applications
- Interpreting Antenna Performance Parameters for EMC Applications An excellent page with summaries of all the relevant equations
- Antenna Theory
- Antenna Factor Calculator