Spatial rotations in three dimensions can be parametrized using both Euler angles and unit quaternions. This article explains how to convert between the two representations. Actually this simple use of "quaternions" was first presented by Euler some seventy years earlier than Hamilton to solve the problem of magic squares. For this reason the dynamics community commonly refers to quaternions in this application as "Euler parameters".
Definition
There are two representations of quaternions. This article uses the more popular Hamilton.
A quaternion has 4 scalar values: qw (the real part) and qx qy qz (the imaginary part).
We can associate a quaternion with a rotation around an axis by the following expression
where α is a simple rotation angle (the value in radians of the angle of rotation) and cos(βx), cos(βy) and cos(βz) are the "direction cosines" of the angles between the three coordinate axes and the axis of rotation. (Euler's Rotation Theorem).
Intuition
To better understand how "direction cosines" work with quaternions:
If the axis of rotation is the x-axis:
If the axis of rotation is the y-axis:
If the axis of rotation is the z-axis:
If the axis of rotation is a vector located 45° (π/4 radians) between the x and y axes:
Therefore, the x and y axes "share" influence over the new axis of rotation.
Tait–Bryan angles
Tait–Bryan angles. z-y′-x″ sequence (intrinsic rotations; N coincides with y’). The angle rotation sequence is ψ, θ, φ. Note that in this case ψ > 90° and θ is a negative angle.
Similarly for Euler angles, we use the Tait Bryan angles (in terms of flight dynamics):
Heading – : rotation about the Z-axis
Pitch – : rotation about the new Y-axis
Bank – : rotation about the new X-axis
where the X-axis points forward, Y-axis to the right and Z-axis downward. In the conversion example above the rotation occurs in the order heading, pitch, bank.
If is not a unit quaternion then the homogeneous form is still a scalar multiple of a rotation matrix, while the inhomogeneous form is in general no longer an orthogonal matrix. This is why in numerical work the homogeneous form is to be preferred if distortion is to be avoided.
The direction cosine matrix (from the rotated Body XYZ coordinates to the original Lab xyz coordinates for a clockwise/lefthand rotation) corresponding to a post-multiply Body 3-2-1 sequence with Euler angles (ψ, θ, φ) is given by:[1]
Euler angles for Body 3-1-3 Sequence – The xyz (original fixed Lab) system is shown in blue, the XYZ (rotated final Body) system is shown in red. The line of nodes, labelled N and shown in green, is the intermediate Body X-axis around which the second rotation occurs.
Euler angles (in 3-2-1 sequence) to quaternion conversion
By combining the quaternion representations of the Euler rotations we get for the Body 3-2-1 sequence, where the airplane first does yaw (Body-Z) turn during taxiing onto the runway, then pitches (Body-Y) during take-off, and finally rolls (Body-X) in the air. The resulting orientation of Body 3-2-1 sequence (around the capitalized axis in the illustration of Tait–Bryan angles) is equivalent to that of lab 1-2-3 sequence (around the lower-cased axis), where the airplane is rolled first (lab-x axis), and then nosed up around the horizontal lab-y axis, and finally rotated around the vertical lab-z axis (lB = lab2Body):
Other rotation sequences use different conventions.[1]
Source code
Below code in C++ illustrates above conversion:
structQuaternion{doublew,x,y,z;};// This is not in game format, it is in mathematical format.QuaternionToQuaternion(doubleroll,doublepitch,doubleyaw)// roll (x), pitch (y), yaw (z), angles are in radians{// Abbreviations for the various angular functionsdoublecr=cos(roll*0.5);doublesr=sin(roll*0.5);doublecp=cos(pitch*0.5);doublesp=sin(pitch*0.5);doublecy=cos(yaw*0.5);doublesy=sin(yaw*0.5);Quaternionq;q.w=cr*cp*cy+sr*sp*sy;q.x=sr*cp*cy-cr*sp*sy;q.y=cr*sp*cy+sr*cp*sy;q.z=cr*cp*sy-sr*sp*cy;returnq;}
Quaternion to Euler angles (in 3-2-1 sequence) conversion
A direct formula for the conversion from a quaternion to Euler angles in any of the 12 possible sequences exists.[2] For the rest of this section, the formula for the sequence Body 3-2-1 will be shown. If the quaternion is properly normalized, the Euler angles can be obtained from the quaternions via the relations:
Note that the arctan functions implemented in computer languages only produce results between −π/2 and π/2, which is why atan2 is used to generate all the correct orientations. Moreover, typical implementations of arctan also might have some numerical disadvantages near zero and one.
Some implementations use the equivalent expression:[3]
Source code
The following C++ program illustrates conversion above:
#define _USE_MATH_DEFINES#include<cmath>structQuaternion{doublew,x,y,z;};structEulerAngles{doubleroll,pitch,yaw;};// this implementation assumes normalized quaternion// converts to Euler angles in 3-2-1 sequenceEulerAnglesToEulerAngles(Quaternionq){EulerAnglesangles;// roll (x-axis rotation)doublesinr_cosp=2*(q.w*q.x+q.y*q.z);doublecosr_cosp=1-2*(q.x*q.x+q.y*q.y);angles.roll=std::atan2(sinr_cosp,cosr_cosp);// pitch (y-axis rotation)doublesinp=std::sqrt(1+2*(q.w*q.y-q.x*q.z));doublecosp=std::sqrt(1-2*(q.w*q.y-q.x*q.z));angles.pitch=2*std::atan2(sinp,cosp)-M_PI/2;// yaw (z-axis rotation)doublesiny_cosp=2*(q.w*q.z+q.x*q.y);doublecosy_cosp=1-2*(q.y*q.y+q.z*q.z);angles.yaw=std::atan2(siny_cosp,cosy_cosp);returnangles;}
Singularities
One must be aware of singularities in the Euler angle parametrization when the pitch approaches ±90° (north/south pole). These cases must be handled specially. The common name for this situation is gimbal lock.
Code to handle the singularities is derived on this site: www.euclideanspace.com
Vector rotation
Let us define scalar and vector such that quaternion .
Note that the canonical way to rotate a three-dimensional vector by a quaternion defining an Euler rotation is via the formula
where is a quaternion containing the embedded vector , is a conjugate quaternion, and is the rotated vector . In computational implementations this requires two quaternion multiplications. An alternative approach is to apply the pair of relations
where indicates a three-dimensional vector cross product. This involves fewer multiplications and is therefore computationally faster. Numerical tests indicate this latter approach may be up to 30% [4] faster than the original for vector rotation.
Proof
The general rule for quaternion multiplication involving scalar and vector parts is given by
Using this relation one finds for that
and upon substitution for the triple product
where anti-commutivity of cross product and has been applied. By next exploiting the property that is a unit quaternion so that , along with the standard vector identity
one obtains
which upon defining can be written in terms of scalar and vector parts as
^ abNASA Mission Planning and Analysis Division (July 1977). "Euler Angles, Quaternions, and Transformation Matrices". NASA. Retrieved 24 May 2021.
^Bernardes, Evandro; Viollet, Stéphane (10 November 2022). "Quaternion to Euler angles conversion: A direct, general and computationally efficient method". PLOS ONE. 17 (11): e0276302. Bibcode:2022PLoSO..1776302B. doi:10.1371/journal.pone.0276302. ISSN 1932-6203. PMC 9648712. PMID 36355707.
^Blanco, Jose-Luis (2010). "A tutorial on se (3) transformation parameterizations and on-manifold optimization". University of Malaga, Tech. Rep. CiteSeerX 10.1.1.468.5407.
^Janota, A; Šimák, V; Nemec, D; Hrbček, J (2015). "Improving the Precision and Speed of Euler Angles Computation from Low-Cost Rotation Sensor Data". Sensors. 15 (3): 7016–7039. Bibcode:2015Senso..15.7016J. doi:10.3390/s150307016. PMC 4435132. PMID 25806874.
External links
Q60. How do I convert Euler rotation angles to a quaternion? and related questions at The Matrix and Quaternions FAQ