Corrosion engineering
Corrosion engineering is an engineering specialty that applies scientific, technical, engineering skills, and knowledge of natural laws and physical resources to design and implement materials, structures, devices, systems, and procedures to manage corrosion.[1] From a holistic perspective, corrosion is the phenomenon of metals returning to the state they are found in nature.[2] The driving force that causes metals to corrode is a consequence of their temporary existence in metallic form. To produce metals starting from naturally occurring minerals and ores, it is necessary to provide a certain amount of energy, e.g. Iron ore in a blast furnace. It is therefore thermodynamically inevitable that these metals when exposed to various environments would revert to their state found in nature.[3] Corrosion and corrosion engineering thus involves a study of chemical kinetics, thermodynamics, electrochemistry and materials science.
General background
Generally related to metallurgy or materials science, corrosion engineering also relates to non-metallics including ceramics, cement, composite material, and conductive materials such as carbon and graphite. Corrosion engineers often manage other not-strictly-corrosion processes including (but not restricted to) cracking, brittle fracture, crazing, fretting, erosion, and more typically categorized as Infrastructure asset management. In the 1990s, Imperial College London even offered a Master of Science degree entitled "The Corrosion of Engineering Materials".[4] UMIST – University of Manchester Institute of Science and Technology and now part of the University of Manchester also offered a similar course. Corrosion Engineering master's degree courses are available worldwide and the curricula contain study material about the control and understanding of corrosion. Ohio State University has a corrosion center named after one of the more well known corrosion engineers Mars G Fontana.[5]
Corrosion costs
In the year 1995, it was reported that the costs of corrosion nationwide in the USA were nearly $300 billion per year.[6] This confirmed earlier reports of damage to the world economy caused by corrosion.
Zaki Ahmad, in his book Principles of corrosion engineering and corrosion control, states that "Corrosion engineering is the application of the principles evolved from corrosion science to minimize or prevent corrosion".[7] Shreir et al. suggest likewise in their large, two volume work entitled Corrosion.[8] Corrosion engineering involves designing of corrosion prevention schemes and implementation of specific codes and practices. Corrosion prevention measures, including Cathodic protection, designing to prevent corrosion and coating of structures fall within the regime of corrosion engineering. However, corrosion science and engineering go hand-in-hand and they cannot be separated: it is a permanent marriage to produce new and better methods of protection from time to time. This may include the use of Corrosion inhibitors. In the Handbook of corrosion engineering, the author Pierre R. Roberge states "Corrosion is the destructive attack of a material by reaction with its environment. The serious consequences of the corrosion process have become a problem of worldwide significance."[9]
Costs are not only monetary. There is a financial cost and also a waste of natural resources. In 1988 it was estimated that one tonne of metal was converted completely to rust every ninety seconds in the United Kingdom.[10] There is also the cost of human lives. Failure whether catastrophic or otherwise due to corrosion has cost human lives.[11]
Corrosion engineering and corrosion societies and associations
Corrosion engineering groups have formed around the world to educate, prevent, slow, and manage corrosion. These include the National Association of Corrosion Engineers (NACE), the European Federation of Corrosion (EFC), The Institute of Corrosion in the UK and the Australasian Corrosion Association. The corrosion engineer's main task is to economically and safely manage the effects of corrosion of materials.
Notable contributors to the field
Some of the most notable contributors to the Corrosion Engineering discipline include among others:
- Michael Faraday (1791–1867)
- Marcel Pourbaix (1904–1998)
- Herbert H. Uhlig (1907–1993)
- Ulick Richardson Evans (1889–1980)
- Mars Guy Fontana (1910–1988)
- Melvin Romanoff ( -1970)
Types of corrosion situations
Corrosion engineers and consultants tend to specialize in Internal or External corrosion scenarios. In both, they may provide corrosion control recommendations, failure analysis investigations, sell corrosion control products, or provide installation or design of corrosion control and monitoring systems.[7][12][13][14][15] Every material has its weakness. Aluminum, galvanized/zinc coatings, brass, and copper do not survive well in very alkaline or very acidic pH environments. Copper and brasses do not survive well in high nitrate or ammonia environments. Carbon steels and iron do not survive well in low soil resistivity and high chloride environments.[16] High chloride environments can even overcome and attack steel encased in normally protective concrete. Concrete does not survive well in high sulfate and acidic environments. And nothing survives well in high sulfide and low redox potential environments with corrosive bacteria. This is called Biogenic sulfide corrosion.[17][18]
External corrosion
Underground soil side corrosion
Underground corrosion control engineers collect soil samples to test soil chemistry for corrosive factors such as pH, minimum soil resistivity, chlorides, sulfates, ammonia, nitrates, sulfide, and redox potential.[19][20] They collect samples from the depth that infrastructure will occupy, because soil properties may change from strata to strata. The minimum test of in-situ soil resistivity is measured using the Wenner four pin method if often performed to judge a site's corrosivity. However, during a dry period, the test may not show actual corrosivity, since underground condensation can leave soil in contact with buried metal surfaces more moist. This is why measuring a soil's minimum or saturated resistivity is important. Soil resistivity testing alone does not identify corrosive elements.[21] Corrosion engineers can investigate locations experiencing active corrosion using above ground survey methods and design corrosion control systems such as cathodic protection to stop or reduce the rate of corrosion.[22]
Geotechnical engineers typically do not practice corrosion engineering, and refer clients to a corrosion engineer if soil resistivity is below 3,000 ohm-cm or less, depending the soil corrosivity categorization table they read. Unfortunately, an old dairy farm can have soil resistivities above 3,000 ohm-cm and still contain corrosive ammonia and nitrate levels that corrode copper piping or grounding rods. A general saying about corrosion is, "If the soil is great for farming, it is great for corrosion."
Underwater external corrosion
Underwater corrosion engineers apply the same principals used in underground corrosion control but use specially trained and certified scuba divers for condition assessment, and corrosion control system installation and commissioning.[23][24] The main difference being in the type of reference cells used to collect voltage readings. Corrosion of piles[25][26] and the legs of oil and gas rigs are of particular concern.[27] This includes rigs in the North Sea off the coast of the United Kingdom and the Gulf of Mexico.
Atmospheric corrosion
Atmospheric corrosion generally refers to general corrosion in a non-specific environment. Prevention of atmospheric corrosion is typically handled by use of materials selection and coatings specifications.[28] The use of zinc coatings also known as galvanization on steel structures is a form of cathodic protection where the zinc acts as a sacrificial anode and also a form of coating.[29] Small scratches are expected to occur in the galvanized coating over time. The zinc being more active in the galvanic series corrodes in preference to the underlying steel and the corrosion products fil the scratch preventing further corrosion. As long as the scratches are fine, condensation moisture should not corrode the underlying steel as long as both the zinc and steel are in contact. As long as there is moisture, the zinc corrodes and eventually disappears. Impressed current cathodic protection is also used.[30]
![](http://upload.wikimedia.org/wikipedia/commons/thumb/c/cd/Side_view_Crow_Hall_Railway_Bridge_north_of_Preston_Lancs_corroding_-_general.jpg/220px-Side_view_Crow_Hall_Railway_Bridge_north_of_Preston_Lancs_corroding_-_general.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/3/30/Corroding_Steel_Electrification_Gantry.jpg/220px-Corroding_Steel_Electrification_Gantry.jpg)
Splash zone and water spray corrosion
![](http://upload.wikimedia.org/wikipedia/commons/thumb/e/e8/Courtney_Campbell_Causeway_with_noticeable_pile_jackets_on_pilings.jpg/220px-Courtney_Campbell_Causeway_with_noticeable_pile_jackets_on_pilings.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/6/61/Structural_member_Blackpool_Promenade_at_Bispham_badly_corroded.jpg/220px-Structural_member_Blackpool_Promenade_at_Bispham_badly_corroded.jpg)
The usual definition of a splash zone is the area just above and just below the average water level of a body of water. It also includes areas that may be subject to water spray and mist.[31][32][33]
A significant amount of corrosion of fences is due to landscaper tools scratching fence coatings and irrigation sprinklers spraying these damaged fences. Recycled water typically has a higher salt content than potable drinking water, meaning that it is more corrosive than regular tap water. The same risk from damage and water spray exists for above ground piping and backflow preventers. Fiberglass covers, cages, and concrete footings have worked well to keep tools at an arm's length. Even the location where a roof drain splashes down can matter. Drainage from a home's roof valley can fall directly down onto a gas meter causing its piping to corrode at an accelerated rate reaching 50% wall thickness within 4 years. It is the same effect as a splash zone in the ocean, or in a pool with lot of oxygen and agitation that removes material as it corrodes.[34]
Tanks or structural tubing such as bench seat supports or amusement park rides can accumulate water and moisture if the structure does not allow for drainage. This humid environment can then lead to internal corrosion of the structure affecting the structural integrity. The same can happen in tropical environments leading to external corrosion. This would include Corrosion in ballast tanks on ships.
Pipeline corrosion
Hazardous materials are often carried in pipelines and thus their structural integrity is of paramount importance. Corrosion of a pipeline can thus have grave consequences.[35] One of the methods used to control pipeline corrosion is by the use of Fusion bonded epoxy coatings. DCVG is used to monitor it. Impressed current cathodic protection is also used.[36]
Corrosion in the petrochemical industry
The Petrochemical industry typically encounters aggressive corrosive media. These include sulfides and high temperatures. Corrosion control and solutions are thus necessary for the world economy.[37] Scale formation in injection water presents its own problems with regard to corrosion and thus for the corrosion engineer.[38]
Corrosion in ballast tanks
Ballast tanks on ships contain the fuels for corrosion. Water is one and air is usually present too and the water can become stagnant. Structural integrity is important for safety and to avoid marine pollution. Coatings have become the solution of choice to reduce the amount of corrosion in ballast tanks.[39] Impressed current cathodic protection has also been used.[40] Likewise sacrificial anode cathodic protection is also used.[41] Since chlorides vastly accelerate corrosion, ballast tanks of marine vessels are particularly susceptible.[42]
Corrosion in the railway industry
It has been stated that one of the biggest challenges in the United Kingdom railway industry is corrosion.[43] The biggest problem is that corrosion can affect the structural integrity of passenger carrying railway carriages thus affecting their crashworthiness. Other railway structures and assets can also be affected. The Permanent Way Institution give lectures on the subject periodically. In January 2018 corrosion of a metal structure caused the emergency closure of Liverpool Lime Street railway station.[44][45][46]
Galvanic corrosion
![](http://upload.wikimedia.org/wikipedia/commons/thumb/5/5f/Bimetall_corrosion.jpg/220px-Bimetall_corrosion.jpg)
Galvanic corrosion (also called bimetallic corrosion) is an electrochemical process in which one metal (more active one) corrodes preferentially when it is in electrical contact with another dissimilar metal, in the presence of an electrolyte.[47][48] A similar galvanic reaction is exploited in primary cells to generate a useful electrical voltage to power portable devices – a classic example being a cell with zinc and copper electrodes. Galvanic corrosion is also exploited when a sacrificial metal is used in cathodic protection. Galvanic corrosion happens when there are an active metal and a more noble metal in contact in the presence of electrolyte.[49]
Pitting corrosion
Pitting corrosion, or pitting, is extremely localized corrosion that leads to the creation of small holes in the material – nearly always a metal.[50] The failures resulting from this form of corrosion can be catastrophic. With general corrosion it is easier to predict the amount of material that will be lost over time and this can be designed into the engineered structure. Pitting, like crevice corrosion can cause a catastrophic failure with very little loss of material. Pitting corrosion happens for passive materials. The classic reaction mechanism has been ascribed to Ulick Richardson Evans.[51]
Crevice corrosion
Crevice corrosion is a type of localized corrosion with a very similar mechanism to pitting corrosion.[52]
Stress corrosion cracking
![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/b7/Stress-Corrosion-Cracking-Quench-Pipe-1.4541-01.jpg/220px-Stress-Corrosion-Cracking-Quench-Pipe-1.4541-01.jpg)
Stress corrosion cracking (SCC) is the growth of a crack in a corrosive environment.[53] It requires three conditions to take place: 1)corrosive environment 2)stress 3)susceptible material. SCC can lead to unexpected sudden and hence catastrophic failure of normally ductile metals under tensile stress. This is usually exacerbated at elevated temperature. SCC is highly chemically specific in that certain alloys are likely to undergo SCC only when exposed to a small number of chemical environments. It is common for SCC to go undetected prior to failure. SCC usually quite progresses rapidly after initial crack initiation, and is seen more often in alloys as opposed to pure metals. The corrosion engineer thus must be aware of this phenomenon.[54]
Filiform Corrosion
Filiform corrosion may be considered as a type of crevice corrosion and is sometimes seen on metals coated with an organic coating (paint).[55][56] Filiform corrosion is unusual in that it does not weaken or destroy the integrity of the metal but only affects the surface appearance.[57]
![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/0c/Filiform_corrosion_on_painted_aluminum.jpg/220px-Filiform_corrosion_on_painted_aluminum.jpg)
Corrosion fatigue
This form of corrosion is usually caused by a combination of corrosion and cyclic stress.[58] Measuring and controlling this is difficult because of the many factors at play including the nature or form of the stress cycle. The stress cycles cause localized work hardening. So avoiding stress concentrators such as holes etc would be good corrosion engineering design.[59][60]
Selective leaching
This form of corrosion occurs principally in metal alloys. The less noble metal of the alloy, is selectively leached from the alloy. Removal of zinc from brass is a more common example.[61]
Microbial corrosion
Biocorrosion, biofouling and corrosion caused by living organisms are now known to have an electrochemistry foundation.[62][63] Other marine creatures such as mussels, worms and even sponges have been known to degrade engineering materials.[64][65]
Hydrogen damage
Hydrogen damage is caused by hydrogen atoms (as opposed to hydrogen molecules in the gaseous state), interacting with metal.[66]
Erosion corrosion
Erosion corrosion is a form of corrosion damage usually on a metal surface caused by turbulence of a liquid or solid containing liquid and the metal surface.[67] Aluminum can be particularly susceptible due to the fact that the aluminum oxide layer which affords corrosion protection to the underlying metal is eroded away.[68][69]
Hydrogen embrittlement
This phenomenon describes damage to the metal (nearly always iron or steel) at low temperature by diffusible hydrogen.[66] Hydrogen can embrittle a number of metals and steel is one of them. It tends to happen to harder and higher tensile steels.[70][71] Hydrogen cam also embrittle aluminum at high temperatures.[72]). Titanium metal and alloys are also susceptible.[73]
High temperature corrosion
High-temperature corrosion typically occurs in environments that have heat and chemical[74] such as hydrocarbon fuel sources but also other chemicals enable this form of corrosion. Thus it can occur in boilers, automotive engines driven by diesel or gasoline, metal production furnaces and flare stacks from oil and gas production. High temperature oxidation of metals would also be included.[75][76]
Internal corrosion
Internal corrosion is occasioned by the combined effects and severity of four modes of material deterioration, namely: general corrosion, pitting corrosion, microbial corrosion, and fluid corrosivity.[77] The same principals of external corrosion control can be applied to internal corrosion but due to accessibility, the approaches can be different. Thus special instruments for internal corrosion control and inspection are used that are not used in external corrosion control. Video scoping of pipes and high tech smart pigs are used for internal inspections. The smart pigs can be inserted into a pipe system at one point and "caught" far down the line. The use of corrosion inhibitors, material selection studies, and internal coatings are mainly used to control corrosion in piping while anodes along with coatings are used to control corrosion in tanks. In-depth corrosion calculation are performed during material selection studies, and there are many different corrosion models and calculation methods (softwares) that are prevalent in industry. i.e ECE, Predict, De Waard, Norsok M-506 etc.
Internal corrosion challenges apply to the following amongst others:[78] Water pipes; Gas pipes; Oil pipes and Water tank reservoirs.[79][80][81]
Good design to prevent corrosion situations
Corrosion engineering involves good design.[82][83][84] Using a rounded edge rather than an acute edge reduces corrosion.[85] Also not coupling by welding or other joining method, two dissimilar metals to avoid galvanic corrosion is best practice.[78] Avoiding having a small anode (or anodic material) next to a large cathode (or cathodic material) is good practice. As an example, weld material should always be more noble than the surrounding material. Corrosion in ballast tanks on marine vessels can be an issue if good design is not undertaken.[86] Other examples include simple design such as material thickness. In a known corrosion situation the material can just be made thicker so it will take much longer to corrode.[87]
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/7f/Corrosion_at_joint_-_bad_design.jpg/220px-Corrosion_at_joint_-_bad_design.jpg)
Material selection to prevent corrosion situations
Correct selection of the material by the design engineer affects the design life of a structure or pipeline which is very relevant in the Oil and Gas Industry. Sometimes stainless steel is not the correct choice and carbon steel would be better.[88] There is a misconception that stainless steel has excellent corrosion resistance and will not corrode. This is not always the case and should not be used to handle deoxygenated solutions for example, as the stainless steel relies on oxygen to maintain passivation and is also susceptible to crevice corrosion.[89]
Galvanizing or hot-dip galvanizing is used to coat steel with a layer of metallic zinc.[90] Lead or antimony are often added to the molten zinc bath,[91] and also other metals have been studied.[92][93][94][95]
Controlling the environment to prevent corrosion situations
One example of controlling the environment to prevent or reduce corrosion is the practice of storing aircraft in deserts. These storage places are usually called aircraft boneyards. The climate is usually arid so this and other factors make it an ideal environment.[96][97]
Use of corrosion inhibitors to prevent corrosion
An inhibitor is usually a material added in a small quantity to a particular environment that reduces the rate of corrosion.[98][99] They may be classified a number of ways but are usually 1) Oxidizing; 2) Scavenging; 3) Vapor-phase inhibitors;[100] Sometimes they are called Volatile corrosion inhibitor 4) Adsorption inhibitors;[101] 5) Hydrogen-evolution retarder.[102] Another way to classify them is chemically.[103] As there is more concern for the environment and people are more keen to use Renewable resources, there is ongoing research to modify these materials so they may be used as corrosion inhibitors.[104]
Use of coatings to prevent corrosion
A coating or paint is usually a fluid applied covering applied to a surface in contact with a corrosive situation such as the atmosphere.[105][106] The surface is usually called the substrate. In corrosion prevention applications the purpose of applying the coating is mainly functional rather than decorative.[107] Paints and lacquers are coatings that have dual uses of protecting the substrate and being decorative, but paint on large industrial pipes as well as preventing corrosion is also used for identification e.g. red for fire-fighting control etc.[108] Functional coatings may be applied to change the surface properties of the substrate, such as adhesion, wettability, corrosion resistance, or wear resistance.[109] In the automotive industry, coatings are used to control corrosion but also for aesthetic reasons.[110] Coatings are also extensively used in marine environments to control corrosion in an oceanic environment.[111][112] Corrosion will eventually breakthrough a coating and so have a design life before maintenance.[113][114]
![](http://upload.wikimedia.org/wikipedia/commons/thumb/d/d4/Rustpatterns.jpg/220px-Rustpatterns.jpg)
See also
- Anodic protection
- Coating
- Corrosion
- Corrosion societies
- Corrosion inhibitor
- Corrosion in ballast tanks
- DCVG (direct current voltage gradient)
- Electrochemistry
- Environmental stress cracking
- Fracture Mechanics
- Integrity engineering
- Metallurgical failure analysis
- National Institute of Standards and Technology
- Stainless steel
- Stress corrosion cracking
- Structural failure
- Sulfide stress cracking
References
- ^ Trethewey, Kenneth R.; Chamberlain, John (1988). Corrosion for students of science and engineering. Harlow, Essex, England: Longman Scientific & Technical. p. 2. ISBN 0582450896. OCLC 15083645.
- ^ "CoatingsTech - Waterborne Direct-to-Metal Coatings: Enduring Solutions in Corrosion Protection". www.coatingstech-digital.org. Retrieved 7 July 2022.
- ^ Van Muylder, Jean (1981). "Thermodynamics of Corrosion". In Bockris, J. O’M.; Conway, Brian E.; Yeager, Ernest; White, Ralph E. (eds.). Electrochemical Materials Science. Comprehensive Treatise of Electrochemistry. Vol. 4. Boston, MA: Springer US. pp. 1–96. doi:10.1007/978-1-4757-4825-3_1. ISBN 978-1-4757-4825-3.
- ^ Sidky and Hocking (May 1994). "MSc Corrosion of Engineering Materials". Imperial College Lecture Notes.
- ^ "Welcome to the Fontana Corrosion Center". The Fontana Corrosion Center. 2 October 2013. Retrieved 20 February 2021.
- ^ Fontana, Mars G (2005). Corrosion engineering (3rd ed.). New Delhi: Tata McGraw-Hill. p. 1. ISBN 0070607443. OCLC 225414435.
- ^ a b Zaki., Ahmad (2006). Principles of corrosion engineering and corrosion control. Institution of Chemical Engineers (Great Britain) (1st ed.). Boston, MA: Elsevier/BH. ISBN 9780080480336. OCLC 147962712.
- ^ Shreir, L. L.; Burstein, G. T.; Jarman, R. A. (1994). Corrosion (3rd ed.). Oxford: Butterworth-Heinemann. ISBN 159124501X. OCLC 53032654.
- ^ Roberge, Pierre R. (2012). Handbook of corrosion engineering (2nd ed.). New York: McGraw-Hill. ISBN 9780071750370. OCLC 801050825.
- ^ Trethewey, Kenneth R.; Chamberlain, John (1988). Corrosion for students of science and engineering. Harlow, Essex, England: Longman Scientific & Technical. p. 5. ISBN 0582450896. OCLC 15083645.
- ^ "Editorial". Corrosion Prevention and Control. 32: 3. March 1985.
- ^ Roberge, Pierre R. (2008). Corrosion engineering: principles and practice. New York: McGraw-Hill. ISBN 9780071640879. OCLC 228826475.
- ^ Revie, R. Winston, ed. (2011). Uhlig's corrosion handbook (3rd ed.). Hoboken, New Jersey. ISBN 9780470872857. OCLC 729724608.
{{cite book}}
: CS1 maint: location missing publisher (link) - ^ Revie, R. Winston (2008). Corrosion and corrosion control: an introduction to corrosion science and engineering (4th ed.). Hoboken, New Jersey. ISBN 9780470277256. OCLC 228416767.
{{cite book}}
: CS1 maint: location missing publisher (link) - ^ Volkan, Cicek (April 2014). Corrosion engineering. Salem, Massachusetts. ISBN 9781118720752. OCLC 878554832.
{{cite book}}
: CS1 maint: location missing publisher (link) - ^ Landolt, Dieter (2007). Corrosion and surface chemistry of metals (1st ed.). Lausanne, Switzerland: EPFL Press. ISBN 978-0-8493-8233-8. OCLC 141347756.
- ^ "US EPA". nepis.epa.gov. Retrieved 14 October 2021.
- ^ Office of Research & Development. "DESIGN MANUAL: ODOR AND CORROSION CONTROL IN SANITARY SEWERAGE SYSTEMS AND TREATMENT PLANTS". cfpub.epa.gov. Retrieved 14 October 2021.
- ^ Romanoff, Melvin (1964). "Exterior Corrosion of Cast-Iron Pipe". Journal AWWA. 56 (9): 1129–1143. doi:10.1002/j.1551-8833.1964.tb01314.x. ISSN 1551-8833.
- ^ Romanov, Melvyn. "Monograph - underground soil corrosion" (PDF). NIST US Government. Archived (PDF) from the original on 2 February 2017.
- ^ "Project corrosion: Sample collection tips". Archived from the original on 23 August 2018. Retrieved 11 August 2017.
- ^ OFFICIAL EXHIBIT – ENT000391-00-BD01 – M. Romanoff, Underground Corrosion, National Bureau of Standards Circular (1957). (nrc.gov)
- ^ "Anode Systems for Offshore Assets". Deepwater Corrosion Systems. January 2021. Archived from the original on 1 July 2014.
- ^ Schremp, F. W. (1 April 1984). "Corrosion prevention for offshore platforms". Journal of Petroleum Technology. 36 (4): 605–612. doi:10.2118/9986-PA. OSTI 6869041.
- ^ "Control Of Corrosion on Underwater Piles". Civil Engineering Portal – Biggest Civil Engineering Information Sharing Website. 12 November 2017. Retrieved 15 October 2021.
- ^ "Corrosion Protection Methods for Underwater Piles". The Constructor. 20 October 2016. Retrieved 15 October 2021.
- ^ "Guidance notes on CATHODIC PROTECTION OF OFFSHORE STRUCTURES" (PDF). American Bureau of Shipping. December 2018. Archived (PDF) from the original on 1 May 2021.
- ^ Charles Newey; Graham Weaver (1990). Materials principles and practice. Milton Keynes, England: Materials Dept., Open University. pp. 359–370. ISBN 0-408-02730-4. OCLC 19553645.
- ^ Trethewey, Kenneth R.; Chamberlain, John (1988). Corrosion for students of science and engineering. Harlow, Essex, England: Longman Scientific & Technical. pp. 241–253. ISBN 0582450896. OCLC 15083645.
- ^ "Impressed Current Cathodic Protection". Corrosion Prevention. Matcor, Inc. Retrieved 15 October 2021.
- ^ "What is the Splash Zone and How to Protect It?". Mark Tool & Rubber. 28 December 2012. Retrieved 15 October 2021.
- ^ Creamer E.V. "Splash Zone Protection of Marine Structures" Paper number 1274, Offshore Technology Conference, Houston TX, 1970
- ^ Madkour, Loutfy H. INDUSTRIAL CORROSION AND CORROSION CONTROL TECHNOLOGY. pp. 289–329.
- ^ "Splash Zone – an overview | ScienceDirect Topics". www.sciencedirect.com. Retrieved 15 October 2021.
- ^ Control of Pipeline Corrosion A.W.Peabody published 1967 NACE Library of Congress catalog number 76-27507
- ^ "CathFlow® ICCP for buried pipeline". Cathwell (in Norwegian). Retrieved 15 October 2021.
- ^ Groysman, A. (26 July 2017). "Corrosion problems and solutions in oil, gas, refining and petrochemical industry". Koroze a Ochrana Materialu. 61 (3): 100–117. doi:10.1515/kom-2017-0013. ISSN 1804-1213. S2CID 99256913.
- ^ Chilingar, George V. (2008). The fundamentals of corrosion and scaling for petroleum and environmental engineers. Ryan Mourhatch, Ghazi Al-Qahtani. Houston, TX: Gulf Pub. ISBN 978-0-12-799991-3. OCLC 320241586.
- ^ Askheim, Erik (June 1999). "How and Why Corrosion Protection of Ballast Tanks has become the Business of Classification Societies" (PDF). PCE (Protective Coatings Europe): 46–52 – via Technology Publishing Company.
- ^ "Hull Corrosion And Impressed Current Cathodic Protection (ICCP) On Ships – Construction And Working". Marine Insight. 13 May 2021. Retrieved 15 October 2021.
- ^ "Understanding Sacrificial Anodes on Ships". Marine Insight. 21 May 2021. Retrieved 11 March 2022.
- ^ Nwagha, Nzube. "Statistical study on the corrosion of mild steel in saline mediums".
- ^ Harkness, Catriona (July 2018). "Corrosion in the rail industry". The Journal. 136 (Part 3): 20–21 – via Permanent Way Institution.
- ^ Houghton, Alistair (8 January 2018). "Here's what caused the emergency closure of Liverpool Lime Street station". Liverpool Echo. Retrieved 15 October 2021.
- ^ "Corroded structure inspected twice before Lime Street closure". Place North West. 7 February 2018. Retrieved 15 October 2021.
- ^ "Liverpool Lime Street closed for emergency repairs". BBC News. 7 January 2018. Retrieved 15 October 2021.
- ^ Sepulveda, Alexander. Inspector Knowledge Series 03-0. pp. 65–73.
- ^ "Galvanic Corrosion". www.nace.org. Archived from the original on 22 December 2018. Retrieved 21 December 2018.
- ^ Trethewey, Kenneth R.; Chamberlain, John (1988). Corrosion for students of science and engineering. Harlow, Essex, England: Longman Scientific & Technical. pp. 107–111. ISBN 0582450896. OCLC 15083645.
- ^ Sepulveda, Alexander. Inspector Knowledge Series 03-0. pp. 68–72.
- ^ Evans, U.R (1961). The Corrosion and oxidation of metals. Edward Arnold. p. 127.
- ^ "Different Types of Corrosion: Crevice Corrosion -Causes and Prevention". www.corrosionclinic.com. Retrieved 13 October 2021.
- ^ Sepulveda, Alexander. Inspector Knowledge Series 03-0. pp. 101–117.
- ^ "Stress Corrosion Cracking (SCC)". www.nace.org. Archived from the original on 22 December 2018. Retrieved 21 December 2018.
- ^ "Fillform Corrosion – NACE". www.nace.org. Retrieved 7 October 2021.
- ^ Sepulveda, Alexander. Inspector Knowledge Series 03-0. p. 91.
- ^ Fontana, Mars G (2005). Corrosion engineering (3rd ed.). New Delhi: Tata McGraw-Hill. pp. 59–63. ISBN 0070607443. OCLC 225414435.
- ^ Bhardwaj, Darshan. "Introduction to Surface Engineering for Corrosion and Wear Resistance". Surface Engineering for Corrosion and Wear Resistance.
- ^ Charles Newey; Graham Weaver (1990). Materials principles and practice. Milton Keynes, England: Materials Dept., Open University. pp. 335–338. ISBN 0-408-02730-4. OCLC 19553645.
- ^ Bhardwaj, Darshan. Introduction to Surface Engineering for Corrosion and Wear Resistance.
- ^ Sepulveda, Alexander. Inspector Knowledge Series 03-0. pp. 96–100.
- ^ Sepulveda, Alexander. Inspector Knowledge Series 03-0. pp. 53–56.
- ^ Brett, Christopher M. A.; Ana Maria Oliveira Brett (1993). Electrochemistry: principles, methods, and applications. Oxford: Oxford University Press. ISBN 0-19-855389-7. OCLC 26398887.
- ^ Malcolm Smith. "Sponge that eats mortar". Marine Pollution Bulletin. 19 (5): 219–222.
- ^ Schweitzer, Philip A. (2010). Fundamentals of corrosion: mechanisms, causes, and preventative methods. Boca Raton, FL: CRC Press. p. 50. ISBN 978-1-4200-6770-5. OCLC 156818649.
- ^ a b Djukic, M. B.; Sijacki Zeravcic, V.; Bakic, G. M.; Sedmak, A.; Rajicic, B. (1 December 2015). "Hydrogen damage of steels: A case study and hydrogen embrittlement model". Engineering Failure Analysis. Recent case studies in Engineering Failure Analysis. 58: 485–498. doi:10.1016/j.engfailanal.2015.05.017. ISSN 1350-6307.
- ^ Kuruvila, Roshan; Kumaran, S. Thirumalai; Khan, M. Adam; Uthayakumar, M. (1 October 2018). "A brief review on the erosion-corrosion behavior of engineering materials". Corrosion Reviews. 36 (5): 435–447. doi:10.1515/corrrev-2018-0022. ISSN 2191-0316. S2CID 139687369.
- ^ Davis, JR (1999). "Corrosion of Aluminum and Aluminum Alloys". ASM International. Archived from the original on 28 October 2021.
- ^ "Erosion corrosion". corrosion-doctors.org. Retrieved 13 October 2021.
- ^ Djukic, M.B.; et al. (2014). "Hydrogen embrittlement of low carbon structural steel". Procedia Materials Science. 3 (20th European Conference on Fracture): 1167–1172. doi:10.1016/j.mspro.2014.06.190.
- ^ Djukic, M.B.; et al. (2015). "Hydrogen damage of steels: A case study and hydrogen embrittlement model". Engineering Failure Analysis. 58 (Recent case studies in Engineering Failure Analysis): 485–498. doi:10.1016/j.engfailanal.2015.05.017.
- ^ Ambat, Rajan; Dwarakadasa (February 1996). "Effect of Hydrogen in aluminium and aluminium alloys: A review". Bulletin of Materials Science. 19 (1): 103–114. doi:10.1007/BF02744792.
- ^ Eberhart, Mark (2003). Why Things Break. New York: Harmony Books. p. 65. ISBN 978-1-4000-4760-4.
- ^ Ameti, Mustaf (1 January 2008). High temperature tribological behavior of surface coated tool steel.
- ^ Birks, N.; Gerald H. Meier; F. S. Pettit (2006). Introduction to the high-temperature oxidation of metals (2nd ed.). Cambridge, UK: Cambridge University Press. ISBN 0-511-16162-X. OCLC 77562951.
- ^ Young, D. J. (2016). High temperature oxidation and corrosion of metals (2nd ed.). Amsterdam. ISBN 978-0-08-100119-6. OCLC 957635918.
{{cite book}}
: CS1 maint: location missing publisher (link) - ^ O. Olabisi, S. Al-Sulaiman, A. Jarragh, & S. Abraham,"Ranking Pipeline Leakage Susceptibility", Materials Performance, Vol. 57, No. 6, June 2018
- ^ a b "Corrosion Prevention & Control (CPC) Design & Construction Issues | WBDG – Whole Building Design Guide". www.wbdg.org. Retrieved 13 October 2021.
- ^ "How to prevent corrosion". Special Piping Materials. 22 September 2020. Retrieved 13 October 2021.
- ^ "De-Waard model corrosion rate calculator". The Engineering Guide.
- ^ "Material Selection Study & Corrosion Models". The Engineering Guide. 7 November 2023.
- ^ Ahmad, Zaki (2006). Principles of corrosion engineering and corrosion control. Institution of Chemical Engineers (1st ed.). Boston, MA: Elsevier/BH. pp. 438–478. ISBN 978-0-08-048033-6. OCLC 147962712.
- ^ Raymond, K. L. (1962). "Principles of Design for Corrosion Prevention". SAE Technical Paper. SAE Technical Paper Series. 1. doi:10.4271/620229. 620229.
- ^ "Influence of design on corrosion". www.steelconstruction.info. Retrieved 13 October 2021.
- ^ "Corrosion control by design" (PDF). 2021. Archived (PDF) from the original on 17 May 2017.
- ^ "Corrosion on the High Seas: How Ship Owners Battle Rust". www.materialsperformance.com. Retrieved 13 October 2021.
- ^ Fontana, Mars G (2005). Corrosion engineering (3rd ed.). New Delhi: Tata McGraw-Hill. p. 158. ISBN 0070607443. OCLC 225414435.
- ^ Fontana, Mars G (2005). Corrosion engineering (3rd ed.). New Delhi: Tata McGraw-Hill. pp. 278–280. ISBN 0070607443. OCLC 225414435.
- ^ Trethewey, Kenneth R.; Chamberlain, John (1988). Corrosion for students of science and engineering. Harlow, Essex, England: Longman Scientific & Technical. pp. 134–137. ISBN 0582450896. OCLC 15083645.
- ^ Lamesch, J. (February 2005). "The world history of galvanizing". Metallurgical Research & Technology. 102 (2): 119–126. doi:10.1051/metal:2005113. ISSN 0035-1563.
- ^ Seré, P. R.; Culcasi, J. D.; Elsner, C. I.; Di Sarli, A. R. (15 December 1999). "Relationship between texture and corrosion resistance in hot-dip galvanized steel sheets". Surface and Coatings Technology. 122 (2): 143–149. doi:10.1016/S0257-8972(99)00325-4. ISSN 0257-8972.
- ^ Konidaris, S.; Pistofidis, N.; Vourlias, G.; Pavlidou, E.; Stergiou, A.; Stergioudis, G.; Polychroniadis, E. K. (23 April 2007). "Microstructural Study Of Zinc Hot Dip Galvanized Coatings with Titanium Additions In The Zinc Melt". AIP Conference Proceedings. 899 (1): 799. Bibcode:2007AIPC..899..799K. doi:10.1063/1.2733540. ISSN 0094-243X.
- ^ Maeda, Shigeyoshi (1 August 1996). "Surface chemistry of galvanized steel sheets relevant to adhesion performance". Progress in Organic Coatings. 28 (4): 227–238. doi:10.1016/0300-9440(95)00610-9. ISSN 0300-9440.
- ^ "11 Reasons Why You Must Galvanise Steel Galvanised Steel Galvanized Steel". Galvanizers Association. 23 March 2022. Retrieved 22 August 2022.
- ^ Trethewey, Kenneth R.; Chamberlain, John (1988). Corrosion for students of science and engineering. Harlow, Essex, England: Longman Scientific & Technical. pp. 264–266. ISBN 0582450896. OCLC 15083645.
- ^ "Airplane Boneyards in Arizona". www.airplaneboneyards.com. Retrieved 14 October 2021.
- ^ "Coronavirus: How the travel downturn is sending jet planes to 'boneyards'". BBC News. 2 August 2020. Retrieved 14 October 2021.
- ^ Kumar, Engr Ajeet. "corrosion and its inhibition (lecture notes).pdf".
- ^ Trethewey, Kenneth R.; Chamberlain, John (1988). Corrosion for students of science and engineering. Harlow, Essex, England: Longman Scientific & Technical. pp. 228–234. ISBN 0582450896. OCLC 15083645.
- ^ Trethewey, Kenneth R.; Chamberlain, John (1988). Corrosion for students of science and engineering. Harlow, Essex, England: Longman Scientific & Technical. pp. 225–227. ISBN 0582450896. OCLC 15083645.
- ^ Trethewey, Kenneth R.; Chamberlain, John (1988). Corrosion for students of science and engineering. Harlow, Essex, England: Longman Scientific & Technical. p. 230. ISBN 0582450896. OCLC 15083645.
- ^ Fontana, Mars G (2005). Corrosion engineering (3rd ed.). New Delhi: Tata McGraw-Hill. pp. 282–287. ISBN 0070607443. OCLC 225414435.
- ^ Ma, I. A. Wonnie; Ammar, Sh.; Kumar, Sachin S. A.; Ramesh, K.; Ramesh, S. (1 January 2022). "A concise review on corrosion inhibitors: types, mechanisms and electrochemical evaluation studies". Journal of Coatings Technology and Research. 19 (1): 241–268. doi:10.1007/s11998-021-00547-0. ISSN 1935-3804. S2CID 244716439.
- ^ Vaidya, Nishad R.; Aklujkar, Pritish; Rao, Adarsh R. (1 January 2022). "Modification of natural gums for application as corrosion inhibitor: a review". Journal of Coatings Technology and Research. 19 (1): 223–239. doi:10.1007/s11998-021-00510-z. ISSN 1935-3804. S2CID 237156788.
- ^ Sørensen, P. A.; Kiil, S.; Dam-Johansen, K.; Weinell, C. E. (1 June 2009). "Anticorrosive coatings: a review". Journal of Coatings Technology and Research. 6 (2): 135–176. doi:10.1007/s11998-008-9144-2. ISSN 1935-3804. S2CID 137618652.
- ^ Ahmed, Shoaib. Corrosion of Linings & Coatings. pp. 4–12.
- ^ Howarth, G A; Manock, H L (July 1997). "Water-borne polyurethane dispersions and their use in functional coatings". Surface Coatings International. 80 (7): 324–328. doi:10.1007/bf02692680. ISSN 1356-0751. S2CID 137433262.
- ^ Popoola, Api; Olorunniwo, Oe; Ige, Oo (20 February 2014), Aliofkhazraei, M. (ed.), "Corrosion Resistance Through the Application of Anti- Corrosion Coatings", Developments in Corrosion Protection, InTech, doi:10.5772/57420, ISBN 978-953-51-1223-5, retrieved 16 June 2022
- ^ Howarth, G.A. (April 1997). Synthesis of a legislation compliant corrosion protection coating system based on urethane, oxazolidine and waterborne epoxy technology (Master of Science). Imperial College London. pp. 24–27.
- ^ Hans-Joachim Streitberger; Winfried Kreis (2008). Automotive paints and coatings (2nd ed.). Weinheim: Wiley-VCH. p. 427. ISBN 978-3-527-30971-9. OCLC 213101233.
- ^ Chung, Sungchin; Chen, Yufu; Yang, Chujun (2018). "Simulation of Ocean Environmental Corrosion and Analysis of Visual Communication Effect". Journal of Coastal Research: 603–608. ISSN 0749-0208. JSTOR 26543023.
- ^ Sapronov, Oleksandr; Buketov, Andriy; Sapronova, Anna; Sotsenko, Vitalii; Brailo, Mykola; Yakushchenko, Serhii; Maruschak, Pavlo; Smetankin, Serhii; Kulinich, Andriy; Kulinich, Viacheslav; Poberezhna, Liubov (2020). "The Influence of the Content and Nature of the Dispersive Filler at the Formation of Coatings for Protection of the Equipment of River and Sea Transport". SAE International Journal of Materials and Manufacturing. 13 (1): 81–92. doi:10.4271/05-13-01-0006. ISSN 1946-3979. JSTOR 27033958. S2CID 214440107.
- ^ Sakhri, A.; Perrin, F. X.; Aragon, E.; Lamouric, S.; Benaboura, A. (2010). "Chlorinated rubber paints for corrosion prevention of mild steel: A comparison between zinc phosphate and polyaniline pigments". Corrosion Science. 52 (3): 901–909. doi:10.1016/j.corsci.2009.11.010. ISSN 0010-938X.
- ^ del Amo, B.; Blustein, G.; Pérez, M.; García, M.; Deyá, M.; Stupak, M.; Romagnoli, R. (2008). "A multipurpose compound for protective coatings". Colloids and Surfaces A: Physicochemical and Engineering Aspects. 324 (1–3): 58–64. doi:10.1016/j.colsurfa.2008.03.026. hdl:11336/95436. ISSN 0927-7757.
Further reading
- Kreysa, Gerhard; Ota, Ken-ichiro; Savinell, Robert F., eds. (2014). Encyclopedia of Applied Electrochemistry. New York, NY: Springer New York. doi:10.1007/978-1-4419-6996-5. ISBN 978-1-4419-6995-8.
- Ahmad, Zaki (2006). Principles of corrosion engineering and corrosion control. Institution of Chemical Engineers (1st ed.). Boston, MA: Elsevier/BH. ISBN 978-0-08-048033-6. OCLC 147962712.
- Madkour, Loutfy H. INDUSTRIAL CORROSION AND CORROSION CONTROL TECHNOLOGY.
- Brett CMA, Brett AMO, ELECTROCHEMISTRY, Principles, methods, and applications, Oxford University Press, (1993) ISBN 0-19-855389-7
- Jones, Denny A. (1996). Principles and prevention of corrosion. Upper Saddle River, NJ: Prentice Hall. ISBN 0-13-359993-0. OCLC 32664979.
- Fontana, Mars G (2005). Corrosion engineering (3rd ed.). New Delhi: Tata McGraw-Hill. pp. 278–280. ISBN 0070607443. OCLC 225414435.
- P. E., Philip A. Schweitzer (2009). "Fundamentals of Corrosion". Corrosion Technology: 5.
- C. L. Page; P. B. Bamforth; J. W. Figg, eds. (1996). Corrosion of reinforcement in concrete construction. Cambridge: Royal Society of Chemistry, Information Services. ISBN 0-85404-731-X. OCLC 35233292. Papers presented at the Fourth International Symposium on 'Corrosion of Reinforcement in Concrete Construction', held at Robinson College, Cambridge, UK, 1–4 July 1996.
- Materials science. J. C. Anderson (4th ed.). London: Chapman and Hall. 1990. ISBN 0-412-34150-6. OCLC 22361400.
{{cite book}}
: CS1 maint: others (link) - Corrosion - 2nd Edition (elsevier.com) Volume 1and 2; Editor: L L Shreir ISBN 9781483164106
- A.W. Peabody, Peabody's Control of Pipeline Corrosion, 2nd Ed., 2001, NACE International. ISBN 1-57590-092-0
- Ashworth V., Corrosion Vol. 2, 3rd Ed., 1994, ISBN 0-7506-1077-8
- Baeckmann, Schwenck & Prinz, Handbook of Cathodic Corrosion Protection, 3rd Edition 1997. ISBN 0-88415-056-9
- Roberge, Pierre R, Handbook of Corrosion Engineering 1999 ISBN 0-07-076516-2
- Gummow, RA, Corrosion Control of Municipal Infrastructure Using Cathodic Protection. NACE Conference Oct 1999, NACE Materials Performance Feb 2000
- Schweitzer, Philip A. (2007). Corrosion engineering handbook. Fundamentals of metallic corrosion: atmospheric and media corrosion of metals (2nd ed.). Boca Raton: CRC Press. ISBN 978-0-8493-8244-4. OCLC 137248972.
- Schweitzer, Philip A. (2007). Corrosion engineering handbook. Corrosion of polymers and elastomers (2nd ed.). Boca Raton: CRC Press. ISBN 978-0-8493-8246-8. OCLC 137248977.
- Schweitzer, Philip A. (2007). Corrosion engineering handbook. Corrosion of linings and coatings: cathodic and inhibitor protection and corrosion monitoring (2nd ed.). Boca Raton: CRC Press. ISBN 978-0-8493-8248-2. OCLC 137248981.
- Yongchang Huang; Jianqi Zhang (2018). Materials corrosion and protection. Shanghai. ISBN 978-3-11-038295-2. OCLC 1024052058.
{{cite book}}
: CS1 maint: location missing publisher (link)