Cubic foot
cubic foot | ||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() Gas meter with volume measured in cubic feet | ||||||||||||||||||||||||||||
General information | ||||||||||||||||||||||||||||
Unit system | Imperial and US Customary | |||||||||||||||||||||||||||
Unit of | Volume | |||||||||||||||||||||||||||
Symbol | ft3, cu ft | |||||||||||||||||||||||||||
Conversions | ||||||||||||||||||||||||||||
1 ft3 in ... | ... is equal to ... | |||||||||||||||||||||||||||
US Customary | 1728 in3 The cubic foot (symbol ft3 or cu ft)[1] is an imperial and US customary (non-metric) unit of volume, used in the United States and the United Kingdom. It is defined as the volume of a cube with sides of one foot (0.3048 m) in length. Its volume is 28.3168 L (about 1⁄35 of a cubic metre). Conversions
Symbols and abbreviationsThe IEEE symbol for the cubic foot is ft3.[1] The following abbreviations are used: cubic feet, cubic foot, cubic ft, cu feet, cu foot, cu ft, cu.ft, cuft, cb ft, cb.ft, cbft, cbf, feet3, foot3, ft3, feet/-3, foot/-3, ft/-3.[citation needed] Larger multiples are in common usage in commerce and industry in the United States:
Cubic foot per second and related flow ratesThe IEEE symbol for the cubic foot per second is ft3/s.[1] The following other abbreviations are also sometimes used:
The flow or discharge of rivers, i.e., the volume of water passing a location per unit of time, is commonly expressed in units of cubic feet per second or cubic metres per second. Cusec is a unit of flow rate,[2] used mostly in the United States in the context of water flow, particularly of rivers and canals. Conversions: 1 ft3s−1 = 0.0283168 m3/s = 28.3168 L/s = 1.699011 m3/min = 1,699.011 L/min Cubic foot per minuteThe IEEE symbol for the cubic foot per minute is ft3/min.[1] The following abbreviations are used:
Cubic feet per minute is used to measure the amount of air that is being delivered, and is a common metric used for carburettors,[3] pneumatic tools, and air-compressor systems.[4] Standard cubic footA standard cubic foot (abbreviated scf) is a measure of quantity of gas, sometimes[clarification needed] defined in terms of standard temperature and pressure as a cubic foot of volume at 60 degrees Fahrenheit (15.56 °C; 288.71 K) and 14.7 pounds per square inch (PSI) (1.01 bar; 101.35 kPa) of pressure.[citation needed] See also
References
| |||||||||||||||||||||||||||
Length |
| |||||||||||||||||||||||||||
Area |
| |||||||||||||||||||||||||||
Volume |
| |||||||||||||||||||||||||||
Speed | ||||||||||||||||||||||||||||
Mass |
| |||||||||||||||||||||||||||
Pressure | ||||||||||||||||||||||||||||
Other units and measures |
| |||||||||||||||||||||||||||
Related systems |