Fatty Knees
Development | |
---|---|
Designer | Lyle Hess |
Name | Fatty Knees |
Boat | |
Crew | 1 (7' version) 2 (8' version) 2/3 (9' version) |
Trapeze | No |
Hull | |
Type | Monohull |
Construction | Fibreglass |
Hull weight | 90 lb (41 kg) (7' version) 110 lb (50 kg) (8' version) 110 lb (50 kg) (9' version) |
LOA | 7 ft (2.1 m) 8 ft (2.4 m) 9 ft (2.7 m) |
Beam | 4 ft (1.2 m) (7' version) 4 ft 3 in (1.30 m) (8' version) 4 ft 6 in (1.37 m) (9' version) |
Hull appendages | |
Keel/board type | Daggerboard |
Sails | |
Total sail area | 40 sq ft (3.7 m2) (7' version) 50 sq ft (4.6 m2) (8' version) 60 sq ft (5.6 m2) (9' version) |
[edit on Wikidata] |
The Fatty Knees fibreglass sailing dinghies were designed by Lyle Hess[1] (1912–2002). Produced in 7' (2.1m), 8' (2.4m) and 9' (2.7m) long models. The 8' model has a 4' (1.2m) beam. Primarily designed as a yacht tender with good rowing and towing characteristics, the boat can be sailed, with enough width in the beam to provide stability.[2]
The hull has a lapstrake appearance. The thwarts and dagger-board trunk are fiberglass inserts glassed into the hull and are watertight. It is cat rigged with a Bermuda mainsail. A transom notch allows sculling. Equipped with oarlocks for rowing. A small outboard motor can be mounted to port. Sailing gear is designed to be stored inside the hull. About 2000 dinghies have been produced.[citation needed]
References
External links
- Official website
- v
- t
- e
- Cape Cod Frosty
- Flipper (US)
- Frog
- El Toro
- Fatty Knees
- Fly
- Holdfast Trainer
- Manly Junior
- Minto
- Montgomery 7-11
- Naples Sabot
- O'PEN Skiff
- Optimist
- P Class
- Pelican
- Sabot
- Shrimp
- Starling
- Tadpole
- Topaz Taz
- US Sabot
- Zoom 8
0–K |
|
---|---|
L–Z |
|
- Dovekie 21
- Highlander
- Norfolk Punt
- Sea Pearl 21
- A Scow
- Butterfly
- C Scow
- E Scow
- Fireball
- Flipper (Danish)
- I-20
- Melges 17
- M Scow
- MC Scow
- Puddle Duck Racer
- Thames A-class rater
- Y Flyer