Gigabit interface converter
![](http://upload.wikimedia.org/wikipedia/commons/thumb/3/3c/GBIC.jpg/200px-GBIC.jpg)
Gigabit interface converter (GBIC) is a standard for transceivers. First defined in 1995, it was used with Gigabit Ethernet and Fibre Channel. By standardizing on a hot swappable electrical interface, a single gigabit port can support a wide range of physical media, from copper to long-wave single-mode optical fiber, at lengths of hundreds of kilometers.[1]
The small form-factor pluggable transceiver (SFP), also known as mini-GBIC, succeeds GBIC.[2] Announced in 2001, it obsoleted GBIC.
Appeal
Flexibility is the benefit of hot-swappable transceivers like the GBIC standard as opposed to fixed physical interface configurations. Where optical technologies are mixed, an administrator can just-in-time purchase GBICs of the specific type for each link. This flexibility lowers fixed costs. However, if one port type such as copper predominates, a switch with built-in ports is cheaper and space efficient.
Standards
The GBIC standard is openly defined by the Small Form Factor Committee in document number 8053i.[1] The first publication was in November 1995. A few corrections and additions were made through September 2000. Robert Snively of Brocade Communications was the technical editor. The original contributors were AMP Incorporated, Compaq Computers, Sun Microsystems, and Vixel Corporation.[1]
References
![](http://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
- ^ a b c "SFF-8053 Specification for GBIC (Gigabit Interface Converter) revision 5.5". Storage Networking Industry Association. September 27, 2000. Retrieved February 5, 2021.
- ^ "INF-8074i Specification for SFP (Small Formfactor Pluggable Transceiver) revision 1.0" (PDF). Small Form Factor Committee. May 12, 2001. Retrieved June 21, 2011.
- v
- t
- e
- 10 Mbit/s
- 100 Mbit/s
- 1 Gbit/s
- 2.5 and 5 Gbit/s
- 10 Gbit/s
- 25 and 50 Gbit/s
- 40 and 100 Gbit/s
- 200, 400, 800 and 1600 Gbit/s
Category
Commons