Great dirhombicosidodecahedron

Uniform star polyhedron with 124 faces
Great dirhombicosidodecahedron
Type Uniform star polyhedron
Elements F = 124, E = 240
V = 60 (χ = −56)
Faces by sides 40{3}+60{4}+24{5/2}
Coxeter diagram
Wythoff symbol | 3/2 5/3 3 5/2
Symmetry group Ih, [5,3], *532
Index references U75, C92, W119
Dual polyhedron Great dirhombicosidodecacron
Vertex figure
4.5/3.4.3.4.5/2.4.3/2
Bowers acronym Gidrid
3D model of a great dirhombicosidodecahedron.

In geometry, the great dirhombicosidodecahedron (or great snub disicosidisdodecahedron) is a nonconvex uniform polyhedron, indexed last as U75. It has 124 faces (40 triangles, 60 squares, and 24 pentagrams), 240 edges, and 60 vertices.[1]

This is the only non-degenerate uniform polyhedron with more than six faces meeting at a vertex. Each vertex has 4 squares which pass through the vertex central axis (and thus through the centre of the figure), alternating with two triangles and two pentagrams. Another unusual feature is that the faces all occur in coplanar pairs.

This is also the only uniform polyhedron that cannot be made by the Wythoff construction from a spherical triangle. It has a special Wythoff symbol | 32 53 3 52, relating it to a spherical quadrilateral. This symbol suggests that it is a sort of snub polyhedron, except that instead of the non-snub faces being surrounded by snub triangles as in most snub polyhedra, they are surrounded by snub squares.

It has been nicknamed "Miller's monster" (after J. C. P. Miller, who with H. S. M. Coxeter and M. S. Longuet-Higgins enumerated the uniform polyhedra in 1954).

Related polyhedra

If the definition of a uniform polyhedron is relaxed to allow any even number of faces adjacent to an edge, then this definition gives rise to one further polyhedron: the great disnub dirhombidodecahedron which has the same vertices and edges but with a different arrangement of triangular faces.

The vertices and edges are also shared with the uniform compounds of 20 octahedra or 20 tetrahemihexahedra. 180 of the 240 edges are shared with the great snub dodecicosidodecahedron.


Convex hull

Great snub dodecicosidodecahedron

Great dirhombicosidodecahedron

Great disnub dirhombidodecahedron

Compound of twenty octahedra

Compound of twenty tetrahemihexahedra

This polyhedron is related to the nonconvex great rhombicosidodecahedron (quasirhombicosidodecahedron) by a branched cover: there is a function from the great dirhombicosidodecahedron to the quasirhombicosidodecahedron that is 2-to-1 everywhere, except for the vertices.[2]

Cartesian coordinates

Let the point p {\displaystyle p} be given by

p = ( ϕ 1 2 0 ϕ 1 ) {\displaystyle p={\begin{pmatrix}\phi ^{-{\frac {1}{2}}}\\0\\\phi ^{-1}\end{pmatrix}}} ,

where ϕ {\displaystyle \phi } is the golden ratio. Let the matrix M {\displaystyle M} be given by

M = ( 1 / 2 ϕ / 2 1 / ( 2 ϕ ) ϕ / 2 1 / ( 2 ϕ ) 1 / 2 1 / ( 2 ϕ ) 1 / 2 ϕ / 2 ) {\displaystyle M={\begin{pmatrix}1/2&-\phi /2&1/(2\phi )\\\phi /2&1/(2\phi )&-1/2\\1/(2\phi )&1/2&\phi /2\end{pmatrix}}} .

M {\displaystyle M} is the rotation around the axis ( 1 , 0 , ϕ ) {\displaystyle (1,0,\phi )} by an angle of 2 π / 5 {\displaystyle 2\pi /5} , counterclockwise. Let the linear transformations T 0 , , T 11 {\displaystyle T_{0},\ldots ,T_{11}} be the transformations which send a point ( x , y , z ) {\displaystyle (x,y,z)} to the even permutations of ( ± x , ± y , ± z ) {\displaystyle (\pm x,\pm y,\pm z)} with an even number of minus signs. The transformations T i {\displaystyle T_{i}} constitute the group of rotational symmetries of a regular tetrahedron. The transformations T i M j {\displaystyle T_{i}M^{j}} ( i = 0 , , 11 {\displaystyle (i=0,\ldots ,11} , j = 0 , , 4 ) {\displaystyle j=0,\ldots ,4)} constitute the group of rotational symmetries of a regular icosahedron. Then the 60 points T i M j p {\displaystyle T_{i}M^{j}p} are the vertices of a great dirhombicosidodecahedron. The edge length equals 2 {\displaystyle {\sqrt {2}}} , the circumradius equals 1 {\displaystyle 1} , and the midradius equals 1 2 2 {\displaystyle {\frac {1}{2}}{\sqrt {2}}} .

For a great dirhombicosidodecahedron whose edge length is 1, the circumradius is

R = 1 2 2 {\displaystyle R={\frac {1}{2}}{\sqrt {2}}} .

Its midradius is

r = 1 2 {\displaystyle r={\frac {1}{2}}} .

Gallery



Traditional filling

Modulo-2 filling

Interior view, modulo-2 filling

References

  • Coxeter, Harold Scott MacDonald; Longuet-Higgins, M. S.; Miller, J. C. P. (1954), "Uniform polyhedra", Philosophical Transactions of the Royal Society of London. Series A. Mathematical and Physical Sciences, 246 (916): 401–450, Bibcode:1954RSPTA.246..401C, doi:10.1098/rsta.1954.0003, ISSN 0080-4614, JSTOR 91532, MR 0062446, S2CID 202575183
  • Wenninger, Magnus (1974). Polyhedron Models. Cambridge University Press. ISBN 0-521-09859-9. OCLC 1738087.
  • Har'El, Z. Uniform Solution for Uniform Polyhedra., Geometriae Dedicata 47, 57-110, 1993. Zvi Har’El, Kaleido software, Images, dual images
  • Mäder, R. E. Uniform Polyhedra. Mathematica J. 3, 48-57, 1993.
  • Klitzing, Richard. "3D uniform polyhedra".
  1. ^ Maeder, Roman. "75: great dirhombicosidodecahedron". MathConsult.
  2. ^ "Great Dirhombicosidodecahedron". Archived from the original on 2018-10-18. Retrieved 2022-07-24.

External links

  • Weisstein, Eric W. "Great dirhombicosidodecahedron". MathWorld.
  • http://www.mathconsult.ch/showroom/unipoly/75.html
  • http://www.software3d.com/MillersMonster.php