Tjaskers in Germany
A Fluttermühle (Dutch: tjasker) is a type of small drainage windmill used in the Netherlands and Germany. There are six fluttermühle remaining in Germany, all in Lower Saxony.
Locations
Bedekaspel
![](http://upload.wikimedia.org/wikipedia/commons/thumb/2/2a/Moorsee_Flutterm%C3%BChle.jpg/220px-Moorsee_Flutterm%C3%BChle.jpg)
53°26′58″N 7°18′31″E / 53.449548°N 7.308633°E / 53.449548; 7.308633
The boktjasker of Bedekaspel is located near the drainage smock mill Agnes. The system of ditches do not form a complete circle so the mill can only operate with southerly to westerly winds. In 2011 the mill was in a state of disrepair. [1]
Grotegaste/Lütjegaste
53°10′08″N 7°25′22″E / 53.169005°N 7.422895°E / 53.169005; 7.422895
The paaltjasker is located west of Ihrhove near the hamlet Grotegaste and was built in 2000 by millwright Richard Kluin from Ihrhove, [2] together with the fluttermühle of Weenermoor (see below). [3] The mill has four Common sails and is fully functional.[2]
Moorsee
53°23′45″N 8°25′39″E / 53.395703°N 8.427576°E / 53.395703; 8.427576
The paaltjasker is located next to the Moorseer Mühle and is part of its museum. [4] The mill has four Common sails.
Münkeboe
53°30′56″N 7°22′29″E / 53.515481°N 7.374847°E / 53.515481; 7.374847
The boktjasker is part of the village museum Münkeboe. It is a non functional replica or model.[3]
Riepe
53°23′45″N 7°19′51″E / 53.395703°N 7.330756°E / 53.395703; 7.330756
The boktjasker was built in 1986 as a replica [5] of this type of mill that was once common in the region. [6] The tjasker has four symmetrical Common sails that can be covered with wooden slats. The photo in the database of the Deutsche Gesellschaft für Mühlenkunde und Mühlenerhaltung (DGM) shows it having a complete circular ditch system for winding, [7] however recently dated photos show it in a static position taking water directly from a lake. [8]
Weenermoor
53°12′42″N 7°21′19″E / 53.211584°N 7.355336°E / 53.211584; 7.355336
The paaltjasker is located between Weenermoor and Sankt Georgiwold and was built by millwright Richard Kluin from Ihrhove in 2000. The mill was constructed as a nature compensation measure for the construction of the Weenermoor wind farm and is used to raise the water table in a nature reserve. The mill has four Common sails which have a span of 7.10 metres (23 ft 4 in). Winding the mill to face the wind is not possible. The frame has been stiffened by cables to prevent sagging.[9]
See also
References
![](http://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
- ^ "Bedekaspel: Fluttermühle nur noch ein "Wrack" (28.06.2011)" (in German). Ostfriesische Nachrichten. Retrieved 15 August 2012.
- ^ a b "Fluttermühle Grotegaste" (in German). Niedersächsischen Mühlenstraße. Retrieved 15 August 2012.
- ^ a b "Historische Wasserpumpmühlen im zeitgemäßen Einsatz" (in German). Jürgen Morian. Retrieved 15 August 2012.
- ^ "Museum Moorseer Mühle" (in German). Retrieved 15 August 2012.
- ^ "Wasserschöpfmühle Ihlow OT Riepe" (in German). Niedersächsischen Mühlenstraße. Retrieved 15 August 2012.
- ^ "Ostfriesen-Zeitung vom 7. November 1991, "Das Wasser wurde gemahlen", Berend Kruse" (in German). Emder Mühlenverein e.V. Retrieved 15 August 2012.
- ^ "Fluttermühle in Riepe" (in German). Deutsche Gesellschaft für Mühlenkunde und Mühlenerhaltung. Retrieved 15 August 2012.
- ^ "Jugendliche verpassten Ihlower Mühlen eine Schönheitskur" (in German). Gemeinde Ihlow. Retrieved 15 August 2012.
- ^ "Die Fluttermühle (Tjasker)" (in German). Heimatkundlicher Arbeitskreis e. V. Weenermoor - Möhlenwarf - St. Georgiwold - Beschotenweg. Retrieved August 16, 2012.
- v
- t
- e
Bedekaspel, Gifhorn, Lütjegaste, Münkeboe, Moorsee, Riepe, Wendhausen, Weeneermoor |
No windmills. |
No windmills. |